Boxes & templates · Vector / Laser / CNC
Tealight Box (85 x 85 x 35)
A small open box sized for four tealights.
Download
Joints are re-calculated for the thickness you enter.
Heartline Works Original Design. Free to use for personal projects and for products you make and sell. Please do not resell, share or redistribute the design files themselves, alone or in a pack.
- Size
- 175 × 165 mm (6.89 × 6.5 in)
- File formats
- SVG, DXF, PDF, PNG
- Best for
- Cutting out of sheet material.
- Materials
- 3 mm plywood; 3-6 mm MDF; 3 mm acrylic; Thin hardwood; Cardboard / card stock
- Machines
- CO2 laser; Diode laser (thin material); CNC router (with tool-diameter compensation)
- Software
- 2D files (SVG, DXF, PDF) open in vector and CAM programs that read those formats, such as Inkscape, Illustrator, CorelDRAW, LightBurn, Fusion 360 or VCarve. Program names are examples of software that reads the format, not tested guarantees.
- Licence
- Heartline Works Original Design
- Source
- Original design by Heartline Works, constructed from geometry; no third-party artwork, fonts or traced images.
- Design ID
- tealight-box
File check
- 5 closed shapes (0 as true circles in DXF); 308 polyline nodes.
- No open paths: every outline is closed.
- One layer in one hairline colour; units are millimetres, the SVG is sized in real millimetres.
- Finger joints for this template were verified to fit without overlap or gaps in a volume test at 3 mm and 4 mm material.
Always make a test cut or a test print on scrap before production. Kerf and shrinkage differ from machine to machine.
About the joints
Fingers are about twice the material thickness wide, in an odd number so every edge starts and ends with solid material. Panel sizes are outside dimensions. If your joints are tight or loose, adjust the thickness value by your measured kerf and download again. See the kerf guide.